My 3D printer has been cranking out prints day and night. My mind is rich and fertile and I do all the CAD myself.

We already have 3d printed guns (as used by Luigi) but can we build 3d printed missiles?

>>25503093 You tell me, mr shaheed drone engineer.

>>25503112 Very good things muzzies have a low IQ, imagine if terror groups had the know-how to build precision missiles and advanced drones

>>25503123 The so-called free press designates Iran as a terror group.

Where can I get the stl files for a functioning gun? Can Bernd deliver?

3d lera butt

A friend printed me a lil medicine box with two times 7 Days which is very usefull. That aside hes only printing useless crap like plastic flowers and kids toys. Dunno if i would ever go for one as long i dont need parts to go on a killing spread.

What about a clown? :bunti:

Things I print: -weapons -parts for weapons -dildos -parts for sex machine -fixtures -plates with inserts for drill bushings so I can drill holes accurately -tool holders

>>25503183 that's like 2€ at Action

the microplastics are sprayed in the balls

How about a gun?

dragon dildos, which for some reason all look like dog dicks

>>25503791 That's just a toy, it's too small and plastic wouldn't be able to handle the high stresses a missile would experience. The sensor has no range, and the feedback loop is way too slow for the speeds a missile would operate at.

>>25503916 of course but it is pretty cool though, even if it never flies

>>25503951 Yes, and?

>>25504071 BUTT PLUGS

>>25504140 The dildo I printed with a knot at the base is too big for me to take :(

Grenade fuse assemblies

>>25503916 There are technically competent plastics that require higher temperature printing in enclosures, such as ASA, that have been developed and may be suitable. For short range missions with limited requirement for delivery of munitions or shrapnel, such as against small drones and etc., it would seem size would not exclude utility. By my reckoning the most limiting aspect of the build would be the inexpensive camera, which would provide poor target recognition and targeting capabilities. However, this was merely a proof of concept and isn't necessarily a fully developed munition.

>>25504548 >this was merely a proof of concept and isn't necessarily a fully developed munition. same as mine

>>25504548 Sensors and control system is the most important part of the missile. You really need precision and rapid response time.

>>25503195 I can't find any 3D models. Just boring 2D prints.

I printed cat ears and made maid dress for my roomba so this fugger does not get stuck under furniture. oke that was all

>>25504890 >printing the whole family in 3D nice"

I wish it was easy to make ammo, making a gun without being able to shoot it seems lame

I would like to have one but I simply have no time to sit down and create something. If I had no family or no other obligations it would probably be a lot of fun. I have indeed a lot of ideas and possibilities. I always wanted to make an exhaust vent for the toilet which is running according to time spent in the toilet. The exhaust would blow the air trough an active charcoal filter ….

>>25504659 IMHO it would be feasible to build rockets that use the same stuff that is being used to steer drones in ukraine. However, I wouldn't 3d-print the rocket, because just using some commectial tubings for the body would be easier and better. btw, the youtube channel "tech ingredients" has great videos about how high-powered rocket engines are made from chemicals that should be available over the counter in the US. Not in gayrope though, because there they regulate everything. btw, plz stop subsidizing this bullshit with your military.

How much is a 3d printer

>>25505055 start at like 200€-ish, a nice one with all the bells and whistles is more like 500-800 same for resin printers but you'll also want to buy a curing/washing setup and some sort ventilation/filtering on top of that if you don't want to give yourself ass cancer in the long run

>>25505127 >bambu 0.15 points have been added to your social credit score

>>25505166 It just wörks ¯\_(ツ)_/¯

>>25504645 That would work as a flame thrower with a spark plug, a battery, and the right fuel. Don't be an ass. Or, go fuck yourself instead. You know you want to.

>>25504914 If you can get empty cartridge cases and unused bullets, you can recharge the primers and make a smokeless powder replacement from strike anywhere matches.

>>25504659 yes. I can't comment on the control system, but I think the camera needs to be better.

>>25505027 Drones move a lot slower than SAMs, so can use lesser materials. The nice thing about the printed SAM is that all the mounting points are built in and don't have to be machined or added.

>>25505166 Bambu Labs has pissed off it's entire market by requiring all prints to be sent to their printers through their servers. They made mad alle.

>>25506959 You can still print from SD card, retard.

>>25507145 For now, you may be able to.

Can you use CAD or 3d software? If not then you are limited to what other people make. Do you do any prototyping or have a crafting or mechanical hobby? Do you have other hobbies like tabletop gaming or anime? As always, my recommendation is custom action figures and dolls. Especially ball Joint dolls as a project. Not only is it a good test of a bunch of skills but it is a gateway project to other hobbies. Really gets the noggin jogging.

manchild toys

>>25506927 quit trying to sound smart when youre obviously a retard, then

>>25508729 Stick to printing dildos, because fucking yourself is all you're good at.

dropping systems for fpvs and mavics obviously!